Solvent-Free Epoxy Primer
The Essential Foundation for Zero Delamination
System Engineering Overview
90% of all resin floor coating delaminations occur because of inadequate priming. Our 100% solids low-viscosity epoxy primer deeply penetrates concrete micro-capillaries, consolidates weak concrete aggregates, and seals out rising air bubbles before the top layer is applied.
Key Performance Advantages
Technical Specifications Matrix
| Property Parameter | Certified Standard / Performance |
|---|---|
| Viscosity | 350 – 500 mPa.s at 25°C |
| Adhesion to Concrete | > 2.5 MPa (Concrete failure) |
| Coverage Rate | 0.20 – 0.35 kg/m² per coat |
| Pot Life | 30 – 40 minutes at 30°C |
5-Stage Installation Methodology
Moisture Measurement
Checking slab RH before primer selection.
Proportionate Mixing
Mechanical spiral paddle mixing of Part A and Part B.
Squeegee & Roller Spread
Spreading until concrete surface is thoroughly saturated.
Target Facilities & Industries
Require This System For Your Facility?
Schedule an on-site concrete moisture and hardness inspection. Our engineers will measure your floor and provide an itemized engineering quote.
Request Site InspectionCall: +880 1819-199876Ready To Upgrade Your Floor?
Tell us about your space and get a free site visit and written quote. We will measure your concrete, inspect moisture, and recommend the exact chemical system for your operations.